Citizens Liberty Organization / 🌎 Global Channels / 🔫the-armory [part 4]

How could you say something so controversial yet so brave.

PSA = Rebranded Poverty Pony?

PSA = Poor Simps Anonymous

Ohh for some reason that makes me want to engrave Stunning And Brave... Lol.

Bear Creek Arsenal is what every hardcore operator needs

Lmfao

BCA > BCM

Lol

I've been using this chart from Facebook as a guide.

I don't understand the bottom right though. Are they saying they're separate or under destitute?

I have no idea... because aren't they supposed to be good?

Wait a second, since when was Midwest Industries Mid-tier?

Aren't they like... known for their furniture?

No idea. I'm only familiar with maybe half the brands listed. 🤷‍♂️

I'm familiar with most of them. But in all honesty some of the "Operator" tier shit, isn't even that good in my humble opinion.

FN isn't anything special more than a Colt.

H&K just likes to charge more because of their name Granted, they make good products, but they're always overpriced.

BCM has been my "wish list" gun.

Yeah, honestly. I never really gave BCM much attention, but over the past month or so, I've started to notice them more and more. And I think I'll get them as my next purchase.

I'll get a BCM 16". Probably their Recce rifle with Mlok handguard and see about getting a Can to go with it.

Realistically I'll probably be getting Aero someday for my fighting rifle.

It'll save you a few hundred to go with them.

And Aero is reputable.

The only reason I've decided on BCM is because I want a rifle build completely by them, that I know is going to function and work no matter what I put it though (realistically).

Freedom group equals dog shot

BCM is the best duty rifle bang for your buck

Unless you like never want to have to buy a rifle again

Yeah, because I'm a contractor. And though I don't think I'll even be using a personal rifle for any jobs. It's still great to have something in my hands that I can trust during my off-time.

Might as well, you’ll save more buying BCM than upgrading your other parts when they break

One compromise I had thought of was a BCM BCG on an otherwise all Aero rifle.

I've already owned a couple rifles, even built my own. Upgraded over the past couple years and so on so forth. It's been fun. But in the end, I want something purpose built by professionals who have been in the game longer than me.

Since it'll be a custom assembly anyway.

Yeah, you shouldn't have an issue. I've used Aero uppers and Faxon barrles for two of my builds.

Technically, I think I've actually used 3 Aero uppers, haha. And then I have 1 Del-ton upper.

The Delton was my first ever rifle purchase though.

I could buy high tier shit piece by piece and have something usable in maybe a couple years. Lol.

Just remember this. Don't worry about paint and colors. Get a good hard finish, sure... But in a real proper situation, you'll be taking a rattle can to that anyways and covering up whatever color it was beneath.

I love the aesthetic of cerakote and rattlecan, so I'm always torn when I build something. My fighting rifle is rattlecanned and I think I did a pretty good job as all the comments on it are something along the lines of "just don't drop it, you'll never find it again" but when I build this bolt gun that I want to, I'm considering cerakote

Ahhh, well if it's a bolt gun. Chances are it's a show piece more than anything. And even if not, you're supposed to be far away. Go for it if that's what you want.

I'd just recommend you get your fighting rifle all settled out before you do the other stuff.

But you already have one, right?

partially because the chassis I'm looking at already comes with fde cerakote

Ahhh, well FDE is always a great base.

11.5, mixture of aero, bcm, larue, fn, g$, and JP

adjustable gas block + jp captured spring, sooo smooth

So a real bastard build, huh? Lol

Gimme a sec, I'll share mine with you. I haven't painted it though.

picked every part with a purpose since I'm a bit of a maximizer. Everything has to be custom to fit what I want

Faxon and Aero parts mostly. It's on a PSA lower, but I had a buddy check it out and fit everything. Also polished the trigger. So I can trust the lower, but I have an Aero lower on standby. Just need to replace the tube on it first.

Love faxon's barrels. I've got one on my other rifle

my 11.5 has a chf chrome lined fn barrel turned down to something similar to faxon's gunner profile, since I wanted it to be basically indestructible

All of my custom rifles have faxon barrels. I have one pistol with a 7" barrel but I can't remember who makes it.

Kinda wanna sell that upper off for parts.

once I get this rifle put together, I'm considering taking it to a local guy in my city who does cerakote and other gunsmithing stuff. Basically saying, here I'd like it in colors that will blend with the environment here in oklahoma, but also an original work of art. Go nuts. At least I've heard tattoo artists like hearing that sort of thing, so I figure a cerakote artist might like that too.

Thanks for the suggestions to my question earlier. I pretty much match up with the ideas. I do have the joy of being in a state that allows the sale of only a 7 page list of approves firearms so some of your suggestions won't be "possible". Also, I'm more likely to go the prepared, private sale via something armslist like. Just wanted to get input and y'all did not disappoint.

I am disappointed that no one suggested stealing a tactical nuke but I'll get over it😂

Like anyone can find that for under 800

Don't be ridiculous. That's only pulse-grenade level.

How much of an AR-15 is 3d printable? 🤔

Meh.

Asking the wrong question IMO.

To easy to build a P-80 AR-15. The real question is how easy is it too print other guns that wont be named.

The real answer, is none.

The Pistol Grip, at most.

printed plastic cannot handle the stress or heat of a firearm.

I think we all know what one could 3-D print.

No one say it.

A dildo?

There is a 3d printed AK reciever in the works. I seen the prototype shoot probably about 100 rounds until the was a failure with a custom made extractor that bunged up the bolt

Any good scopes yall reccomend? Ideally higher than x9

How viable would 3d ammo be?

Ok. I was just throwing around the idea of printing some parts to save money or even dabble in selling parts, but if it's mostly stuff that can't be plastic I won't bother.

@John Public I could see printing shotgun shell hulls I suppose.

I was just curious if it would be possible to print the bullet and save money that way. I mean, after expenses, youd need to produce several thousand or more but for the enthusiasts who had a desire I wasnt sure it would even work

@Deleted User that actually might be cost effective, if you had the desire to go hunting and or the range and **really** let er rip lol

You could get a small Cnc mill and just Cnc some things

Not sure how practical that is I’ve been drinking

@RooftopKorean Well no good story started with " I was eating a salad when" so it might be a good idea

@[AZ] GunGrabbingMemes I watched your De-sporterizing Enfield video Wholesome shit, man

There's a 3d printed 12 gauge made with parts you can reasonably get in a country that doesn't allow firearms, and it supposedly works pretty well

*cough cough* totally legal to manufacture your own in the US

Nice.

I don’t like the idea of polymer anything if I’m honest as I do feel as if it breaking would be quite easy to do.

I can see a printed shotgun working pretty well. Get the metal parts you need at literally any hardware store

But 3D printed stuff is kinda the modern equivalent of the Sten.... anyone can make one. But the sten is better

Yeah and if you have a failure or malfunction with a 3d printed firearm, the only up side is slightly softer shrapnel

Thankfully the pressurized parts of the liberator 12k are steel. Mostly 3/4" thick steel tube

If everyone is so worried about a receipt (cause very few states actually have registration), then buy one used

%80's are cool. But for the cost you can but a spikes or equivalent lower all day.

Now %80 glocks are another story. Those I feel are totally worth it. I just think the AR lowers are over priced for what they are.

"Just buy a shotgun! 2 blast in the air and they will leave you alone!" 🤣😂

Reminds me of Biden. You don't need one of those ar13s, you need a good double barrel. Two warning shots from a good uh, barrel, will scare away the mailman. Then you can do the thing, the gun thing, children, you can keep sniffing children and the mailman won't take your ar19 because you don't need it.

The children love to play with my hairy legs.

I’m gonna get a Shellback Tactical Rampage and then stick a Spiritus Micro Fight on it.

@Confused and @Sparrow your both dog faced, uh, pony express was uh, you know, the thing. Hey, did I tell you I know a black fella, Bert Oleary. Great guy. Nice wife he had in that Barack, just a swell, respectable, well spoken uh, lady. Vote for me in August for Senate!! 😂😂

Lol

He talks like someone is hitting the suggested word on their phone keypad

In a foreign language so they never correct it