Citizens Liberty Organization / 🌎 Global Channels / 🔫the-armory [part 1]

I don't really like the look or feel of glocks but I respect them. Eventually I'd like to get one

Not a glock guy. Love my CZ

Definitely partial to my M&Ps. Have the shield 9, 40, and the M&P-15

So I was cleaning up my 3D glock print, and the fuckin trigger guard pops off. Thankfully when working with either PLA or PLA+, testers modeling cement is perfect, because it melts that material and welds it together stronger than it originally was. For those of you interested in printing some of your own parts.

Just JB weld that baby back together if it pops off again

Anyone know of anyone selling new Beretta ARX100 16" barrels? Normally I'd just go to, you know...beretta. But they're closed indefinitely because fuck Maryland. Only ones I can find are 10".

I don’t believe I have a lead there.

Anyone have opinions on the Sig Sauer P320/M17? I bought one in December, don’t shoot it much, mainly just as my bedside gun

Bad quality control on early production runs, as is typical of Sig USA. And the M17 has a total ass trigger for some reason. Stock gen 5 glock trigger is miles better. But if you get one that's not broken from the factory, they're good and reliable.

Flannel daddy put out a good vid on them today

That was the M18, not the M17. And when it was manufactured makes a big ass difference with all Sig USA products.

Are there 80% handguns besides Glocks and Sig P320s? (Not including AR handguns)

Not really to my knowledge short of a CNC machine

P320 is okay. Buddy has one and fucked with the M17's. They're fine like anything if you train on it

Looking to build a 556 DMR. Any thoughts on Wylde barreled uppers between BCM and Aero? Is there an appreciable difference in accuracy potential between the two or is it a difference of QC or durability?

I prefer BCM

How far out you looking to shoot?

600ish max, not much point in slinging a 556 beyond that. My priority is consistent accuracy.

yeah tbh you should be fine then. really depends on barrel length and optics

both can hit a plate at that range but id trust bcm more

BCM is super nice. I also really like Aero though. Both are great quality

I'll be replacing the rail and getting it without a BCG, so the barrel accuracy potential is the only concern. It won't be a high round count, mag dumped rifle.

Going to shill Faxon tho

nice ass barrels

Faxon is fantastic. Their barrels can't handle the round counts that bcm can but they're more accurate

That's just part of stainless though. I got just under 1moa with a faxon match grade barrel on an aero upper. If you want more accurate than that, you'll have to get into some pricier barrels. About the highest end I'm aware of is compass lake engineering.

I've got a 14.5 pencil faxon on my competition AR it's wicked

but some super thicc gunshow 10.5 on my fighting gun and it's just fine for what its for

My fighting gun has an 11.5" chf chrome lined tapered barrel from FN. Actually pretty nice so far, though I haven't measured accuracy. I'm guessing given that it's on a bcm upper it's probably hovering around 1moa with good ammo

nice. my thing is heat. pencil with mlok gets uncomfy after a mag if you're doing small unit shit

Cools off faster though. I like the tapered or gunner profile because it's a nice tradeoff, and I hate government profile barrels

yeah, but if you need to do battle drills you wont have time to cool off. 10.5 is chamber thickness to the gas block then .75 to the mussekl

My beretta is a pencil chf chrome lined barrel. Never have heat issues, but it's a 2-3 moa gun and that's what it's made for.

thats a piston gas system tho right?

Planning on building a rifle for my fiance and I think i have the details worked out now

Yes, short stroke.

yeah. i havent actually trained on anything like that, ar's and ak's which both heat up faster

id assume

She's smol, and doesn't like concussion. I've got most of the parts already but it'll likely revolve around: Faxon 11.5 gunner midlength with an adjustable gas block, faxon lightweight bcg, jp captured buffer, carbon fiber mlok rail, and noveske pig

Small, light, low recoil, and a pig to push the blast away from her

>noveske warpig

mah man

Recesses perfectly into the handguard I have

I'm surprised how well they perform at both minimizing recoil and keepint blast away from the boys

It heats up quick but the receiver is designed to dissipate heat very well. Dumping mags, smoke pouring out of it, hands never get hot.

nice

I kinda want a bren

tbh

11.5 barrel, 13.5 handguard, and the pig is about 3 inches if I remember right

something like that

@Confused I remember you asking about that, sounds like a good setup

mines 10.5 barrel 11 or 12 inch hg and it only covers the screw part

Actually gonna be a bit jealous. I have a 16" rifle with a regular bcg and the rest of the parts are the same, and it weighs 5 pounds before optics

nice

Hers will probably be closer to 4

thats sick

When I got that handguard in I knew it would be light but I thought I had been gypped for a second, it feels like a cardboard tube

Wish they would make a pistol wwsd receiver

facts

Built a full polymer AR that weighed out at 4.3lbs with optic. I had fun destroying that rifle 😂

Man i love the WWSD but I just know I would break that shit

My most recent weighs 10lbs 😥

Bruh I saw someone bitching that an 8lb gun was too heavy. My primary gun for years was 18lbs, sheesh

Losing the weight the correct way is EXPENSIVE

My primary is 7.8lbs without a mag.

That’s not bad at all

Nope. Not to me. I really couldn’t care less about weight, I’m grabbing whichever gun I trust the most.

I mean weight does matter, but I feel like people get obsessed over rifle weight for no reason. That’s like, the easiest thing to carry. I’m worried about a weeks worth of batteries and water on my back

I’m not saying it doesn’t actually matter, I just mean, in the moment, I’m grabbing ole trusty. Which would be my 11.6 lbs AR in 7.62 NATO (it’s actually a .308, I just have literally a metric shit ton of 7.62x51) I’ve had it for 11 years and tens of thousands of rounds without a failure

>10 million rounds, no issues

😉

Hope you’ve got a throat erosion gauge

Yessir. I’m estimating another 20000 rounds until she wears out. But, I’ve been wrong before. And if it fails, toss it and grab the next one! 😂

Nice!

What’s that, Knights, lmt?

LMT enhanced. It’s a bastard rifle. Nothing matches

Gotcha

All of mine are like that except one KAC SR15. Well I mean...some of the parts are changed 😂

😂 if I buy a rifle, I only add, never change (unless it breaks) it. I build too many to fuck up my nicest rifles lol

Also *flashes back to me throwing out KAC SR25 barrels and suppressors for having 5k rounds on them even if they pass gauging*

😢

I’ll bet Knights has a fucking pile of issued barrels and suppressors that are perfectly fine, just chillin

So unfortunate

Fugg it 🤷🏻‍♂️ shits in the contract

Truth. Just hate to see shit wasted lol.

It’s not like they melt them down. I think the suppressors get serviced and re-issued eventually

Do they? I figured they would have to be “destroyed “

Nah, we send the gun back to Knights to get the new barrel and suppressor fitted and they keep the old ones, which is a different process then if the military decided the suppressor was done for

Tbh IDK what Knights does with them, but I would doubt they destroy them

https://www.facebook.com/104606541123170/posts/130962708487553/?sfnsn=mo&d=n&vh=e

for those asking about video quality of the Sionyx Aurora one of the first times using it not recommended for duty but a really cool toy

Guys

Is armslist considered a real site?

I've sold and bought from it ads for local dudes

Well. I use it almost daily

Hmmmm... v

Its really one of the only widespread firearm classifieds.

You’d have better luck with arfcom

I’ve used both several times, Arfcom is smoother to browse

And there feedback system is pretty helpful